Jump to content

Change Mode

2.58ghz At 1.65vcore Or 2.5ghz At 1.53?


Recommended Posts

which oc should i keep it at 2.58ghz at 1.65 or 2.5ghz at 1.53? will it hurt too run it at 1.64vcore? my temps are 43c too 45c on my temp controller i got it on the heatsink pretty close too the cpu. and the onboard one is 58 too 60c this is with the 1.52vcore.

at 1.65 its at 45c too 48c on temp probe and 65c too 68c onboard. but i dont trust the oboard one because i could game for hours when it was saying 68c too 70c with out a problem and the temp probe was ony saying 45 too 48 too 50.

Link to post
Share on other sites

what about 2.4ghz at 1.5vcore 437mhz mem vs 2.5ghzs 1.53vcore 417mhzs mem which one is faster?

The 2.5Ghz would be faster, since there is only a 20Mhz difference in mem speed, but a 100Mhz difference in clock speed.
Link to post
Share on other sites

which oc should i keep it at 2.58ghz at 1.65 or 2.5ghz at 1.53? will it hurt too run it at 1.64vcore? my temps are 43c too 45c on my temp controller i got it on the heatsink pretty close too the cpu. and the onboard one is 58 too 60c this is with the 1.52vcore.

at 1.65 its at 45c too 48c on temp probe and 65c too 68c onboard. but i dont trust the oboard one because i could game for hours when it was saying 68c too 70c with out a problem and the temp probe was ony saying 45 too 48 too 50.

what bios are u using. The older ones had a temp bug reported +15c
Link to post
Share on other sites

im useing the 10/15 it seemed ony too help my idel temp. befor the bios it was 45 too 50 ideling and the load temp seemed like it didint change. im geting the same reading from the onboard sensor when i had my stock amd 64bit heatsink on thats why i realy dont trust the onboard one. the heatsink im useing now is a zalman 7000.

Link to post
Share on other sites

im useing the 10/15 it seemed ony too help my idel temp. befor the bios it was 45 too 50 ideling and the load temp seemed like it didint change. im geting the same reading from the onboard sensor when i had my stock amd 64bit heatsink on thats why i realy dont trust the onboard one. the heatsink im useing now is a zalman 7000.

im idling @ 27c stock load is 33c /w xp90c

 

even overclocked to 2500 mhz still idle @ 30c in windows load goes up to 44ish

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...