JustinP526 Posted September 26, 2015 Share Posted September 26, 2015 Can get the following GPU for $20 but, I'm a little confused on this one. http://www.newegg.com/Product/Product.aspx?Item=N82E16814130795 I assume it will fold, but please correct me if I'm wrong. The specs listed say DX 12 (feature level 11_0), no idea what that means but the card actually shows DX11 support right on the fan shroud. It also shows in specs as OpenGL 4.4, but on the card itself says OpenGL 4.2 Power requirement says 350 watt or greater with a minimum 20 amp on the +12v rail. My current PSU has dual +12v rails showing as +12v1 @ 11.0A and +12v2 @ 14.0A. Would that be ok since the 2 total up to 25A, or a bad idea to risk it? Don't know whether the DX support would matter or not, but the OpenGL one should since I'm running openSUSE. Link to comment Share on other sites More sharing options...
caintry_boy Posted September 26, 2015 Share Posted September 26, 2015 Running Linux or Windows? Anyway, see the requirements below Windows > https://folding.stanford.edu/home/guide/windows-install-guide/#ntoc4 Linux > https://folding.stanford.edu/home/guide/linux-install-guide/#ntoc4 Link to comment Share on other sites More sharing options...
terry1966 Posted September 26, 2015 Share Posted September 26, 2015 My current PSU has dual +12v rails showing as +12v1 @ 11.0A and +12v2 @ 14.0A. both those rails are lower than a minimum 20 amp on the +12v rail so unless you can share the load between the your 2 rails then i'd suggest using a better psu with a single rail of at least 20A. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now