Jump to content

Tx Redneck

Admins
  • Content Count

    6,803
  • Joined

Everything posted by Tx Redneck

  1. Hola @Glenn Sonne and This is an interesting one I've not seen before, I'll pass it on to our developers to see what's going on. Thanks for your support and patience! Tx
  2. Hola @Blabbs and All of our product support is done through our Help desk. It can be reached at https://www.pcmatic.com/support/. Our Help Desk is the only official source, and fastest way, to receive support for PC Matic products. Thanks again for your patience! Tx
  3. Hola @E Robert Soracco and I've passed this onto our Help Desk, please keep your eyes open for an email from us. Thanks for your support and patience! Tx
  4. Hola @ClientsFirst and Thanks for the heads up, we're aware of the issue and actively tracking it down. Thanks for your patience and support! Tx
  5. Hola @glentaylor and My apologies for the inconvenience, the problem should now be resolved. If you're still experiencing issues, please reach out to our Help Desk at https://www.pcmatic.com/support/ Thanks for you patience and support of our software. Tx
  6. Hola @fdkpdxand All of our product support is done through our Help desk. It can be reached at https://www.pcmatic.com/support/. Our Help Desk is the only official source, and fastest way, to receive support for PC Matic products. Thanks again for your patience! Tx
  7. Hello and Please accept my apologies for the inconvenience this has caused, the problem should be resolved now for the web pages, we're actively investigating the Android app issue. If you experience any issues going forward, please don't hesitate to reach out to our Help Desk. All of our product support is done through our Help desk That can be reached at https://www.pcmatic.com/support/. Our Help Desk is the only official source, and fastest way, to receive support for PC Matic products. Thanks again for your patience! Tx
  8. Hola @dancewithmehenry and All of our product support is done through our Help desk That can be reached at https://www.pcmatic.com/support/. Our Help Desk is the only official source, and fastest way, to receive support for PC Matic products. Please follow the instructions at https://pcmatic.com/add-device to install, log in, and begin using PC Matic. There are video instructions located at the links below: How to install https://vimeo.com/403050868/f829378f52 How to run a scan quick start https://vimeo.com/405443422/026f175e5f
  9. Hola @TBROOSTERRand I've passed this onto our Help Desk, please keep your eyes open for an email from us. Thanks for your support and patience! Tx
  10. Hola and Thanks for your interest in our products. I'm sorry you're having difficulty downloading PC Matic, here's a link to the installer, just choose the operating system you intend to run PC Matic on. https://www.pcmatic.com/add-device/ Should you have any questions about PC Matic or need product support, our Help Desk can be reached at https://www.pcmatic.com/support/, it's the only source for official PC Matic product support. If you find we don't meet your needs within 30 days of purchase, you're entitled to a full refund, no questions asked. We look fo
  11. I'll admit, I didn't care for his flavor of rock n roll, but he was one heck of a musician and entertainer. Tx
  12. Hey Unc, thanks for the input. This was something that we tried to do back when the forum rebranding took place, but the systems that Stanford has that handles this weren't working properly. Now that you mention it, I could have said something then to flesh out where everyone was on the matter. My apologies for not having done so. Tx
  13. Bubba, I also was on TRP and Raymo was active on FB up until mid August when he lost a loved one. He's the only person I recall knowing form there to have stayed in "contact" with over the years. Glad to see you and @aaronlewis89 both! Yall don't be shy and stop by every now and again. Tx
  14. Hola ladies and gents, I'm sure you've noticed the forums have had a name change over the last year or so, and to bring our [email protected] Team name in line with the forums and our branding, we've changed the [email protected] team name as well. All of your credit will remain and follow you as long as you're folding for 32035. If you've any questions or concerns, please do not hesitate to post a reply here! Tx
  15. Wait, they're ending the simulations for COVID? Is that to say they had success or have they stated why they're ending it? Edit:Just found this on the [email protected] forums. https://foldingathome.org/2020/09/28/foldingathome-gets-cuda-support/
  16. Did they adjust the points for WU's or are we getting some new ones that are less computationally expensive? I ask because my single 1080 put out almost 1.7M points yesterday, it's all I'm folding on. Tx
  17. Nope, I never figured it out, but there was something I'd run that would break it and wouldn't realize or catch it until after the fact.
  18. I had this happen on my Aunt's laptop, just last week. The only thing that I found to "fix it" was system restore to a past date. No rhyme or reason for it, but that was all I could do to get it to reconnect. I'm still in the dark on that one.
  19. Bud, we've also lost YKawika and Caintry Boy in the last few years. There's really only a handful of legit old timers and then folks like myself that are rapidly becoming the new-old timers. If you've a choice not to age, I'd recommend it, it most certainly doesn't end in our favor.
  20. Hola @Jess Flores and All of our product support is done through our Help desk that can be reached at https://www.pcmatic.com/support/. Our Help Desk is the only official source, and fastest way, to receive support for PC Matic products. Thanks again for your patience and we look forward to serving your computer security needs! Tx
  21. Hola @Ronald427 and I've sent instructions to you here, via PM. As well, you should receive an email from our Help Desk to the email address you used to sign up here and that also corresponds to your account. Thanks for your support of our software! Tx
  22. Hola @namitakumari and I hope you find our lil corner of the internet useful and enjoy your time here. Tx
×
×
  • Create New...