Jump to content

ctran503

Advanced Member
  • Content Count

    2,289
  • Joined

  • Last visited

Everything posted by ctran503

  1. yea...i pulled the temps off there...i think im going to reseat this cpu....ill be back with you guys in a little while..
  2. Bumped it up to 1.33 just for stability check and i may draw it back... 75C Cpu... 85-90 across the cores... with prime 95 load
  3. i dont know...anytime i try past 200.... no matter the volts it wont boot... its kinda crazy...
  4. set everything to auto... multi @ 20 BCLK @ 210 CPU volt @ upto 1.35v Dram timings on auto ram is rated at 1600... so it set it to 16xx and also underclocked @ 12xx uncore is at 2x (minimum setting) i wont get past the start up screen so i can access bios...it freezes instantly so i cant hit DEL or tab... once i try 205 or 210 BCLK and save/exit bios.....it freezes instantly. @ 200bclk its perfect and stable...anything over that point wont even boot correctly...so i dont know what it is...
  5. i get in but not stable... http://pcpitstop.com/betapit/sec.asp?conid...;report=Summary the test reports a wrong CPU clock...but its still okay to run a pit test but nothing else.
  6. I need some tips here....on overclocking over 4.0ghz it seems i hit a snag on start up when trying to go over 4ghz I have my dram settings currently @ 7-7-7-20 up to 4ghz. when i go over 4ghz i try 8-8-8-20 or 24 and still no boot i change my voltages to about 1.32-1.34 when going over 4ghz...still no boot... I dont know whats doing on...or if i am missing a setting...
  7. still getting used to this but i keep hitting a wall at 4.0+ and stable... 4.0 it stable prime95 for 20 minutes+ i now have to figure out how to up the clock and get it to boot correctly...and stabilize it...i know this chip can hit 4.3+ but i cant seem to find the right settings...it always freezes up on the main boot screen... well its all trial and error...
  8. upped the multi to 21... http://www.pcpitstop.com/betapit/sec.asp?conid=22845024 something is lagging the internet right now...so ignore that part of it.,
  9. is there something that changes the multiplier automatically? It seems windows starts with the 20x multi and the after pit and 3dmark test it scales back to 12x multi..... Thats where my test seems to slow down in is the CPU... http://pcpitstop.com/betapit/sec.asp?conid=22845678 heres the lastest test...top 1% or better for everything but internet new 3dmark with o/cing http://service.futuremark.com/compare?3dm06=12266712
  10. 200x20ram @ 1603 voltage ram @ 1.65 cpu 1.23-1.25 I also have some other stuff set...but mostly its all on auto. Seems stable but once i get into other test...prime or otherwise...it starts to freeze up...
  11. http://www.pcpitstop.com/betapit/sec.asp?conid=22845024 i cant seems to figure out why my video is lagging...i should be getting about double the 2d score...but still in the top 1%
  12. Having some stability issues running at 4.0ghz... it will boot and run pcpit test...but prime and everest test freeze up the system. Anyone have a solution? I have everything set to auto except the bclk and the CPU voltage. http://pcpitstop.com/betapit/sec.asp?conid...;report=Summary the video score seems very low to me....but everything else seems good so far...i cant figure it out...
  13. So the final specs of the system Asus rampage Gene II Intel i7 920 6gb Corsair DDR3 1600 2 Intel X-25m 80gb in raid HIS Radeon HD5870 Coolermaster v10 cooler PC&P 750W PSU whats a good stock temp for this chip? i get about 29C on this...36-37c across the cores...with no load... first 3dmark06 run all stock... http://service.futuremark.com/compare?3dm06=12259555
  14. First run... system completely stock @ 1.10v everything else on auto. :-) http://pcpitstop.com/betapit/sec.asp?conid=22842623
  15. i figured it out...LOL... I usually put the ram in the slots closest to the processor... This mobo has the 2nd, 4th, 6th slots as the mains ones...lol... Now...where did i put the windows 7...
  16. i cant figure out why i cant get a video signal from the system. I have the ram set in and reset in 2 times...i checked all my connectors...i dont have it in the case at the moment. Maybe its the video card not seating correctly? I seems as if it isnt in deep enough but i cant push it in any farther... it starts booting but i cant get the video signal to come up... Anyone have suggestions?
  17. I got back from my semi-vacation/ visiting my sick grandma... I got back to my delivery of my CPU...and now i can start the building. Tommorow will be the modding the case to fit everything and disassembling the old setup. Hope everything goes smoothly and by tommorow night i should have the system up and running. here the images of the initial setup before i install the cooler. i7 920 2.6 SLBEJ 3845B260 Im going to do an open air cooling as initial setup...and then move it into the case tuesday or so...
  18. man i cant sleep.. WHat chip batch did you get? im just trying to keep track of batches and see if they really make a difference
  19. Well i will be putting this stuff on hold for about 2 weeks... Family emergency with my grandma. So Im probably leaving tommorow morning... See ya guys soon... this is a preview of what should have come together this week....but i will be back in 2 weeks
  20. 5850 is for those who dont want so much power and dont want to pay the price for the 5870...both have HDMI port built in so it should work for you
  21. well you will be paying the price for SLC.... for a good quality SSD the cost of the SLC in comparison to the same size in MLc is probably double or triple in price, but maybe im wrong?
  22. cant wait to see what kinda voltages you get with it...and how much heat you generate
  23. should be sometime next week...still waiting on my chips... the hd's will be here by friday...well atleast the one from buy.com....still waiting for the one from ANTonline...and i ordered that one a couple days before i ordered the second.
×
×
  • Create New...